|
John Deere 670 Series Single Offset Disks |
| FOLD |
| Type |
Rigid |
| WORKING WIDTHS |
| Spacing option A |
Option 13.63 m11.92 ft, in.Option 24.06 m13.33 ft, in.Option 34.5 m14.75 ft, in.Option 44.93 m16.17 ft, in.Option 55.66 m18.58 ft, in.Option 66.22 m20.42 ft, in.229 mm9 in. |
| Spacing option B |
Option 143.81 m12.5 ft, in.Option 154.09 m13.42 ft, in.Option 164.62 m15.42 ft, in.Option 175.16 m16.92 ft, in.Option 185.59 m18.33 ft, in.Option 196.2 m20.33 ft, in.279 mm11 in. |
| Spacing option C |
|
| TRANSPORT WIDTH |
| Spacing option A |
Option 13.91 m12.83 ft, in.Option 24.34 m14.25 ft, in.Option 34.78 m15.67 ft, in.Option 45.21 m17.08 ft, in.Option 55.94 m19.5 ft, in.Opton 66.5 m21.33 ft, in.229 mm9 in. |
| Spacing option B |
Option 144.09 m13.42 ft, in.Option 154.37 m14.33 ft, in.Option 164.9 m16.08 ft, in.Option 175.44 m17.83 ft, in.Option 185.87 m19.25 ft, in.Option 196.48 m21.25 ft, in.279 mm11 in. |
| Spacing option C |
|
| TRANSPORT HEIGHT |
| Spacing option A |
|
| Spacing option B |
|
| Spacing option C |
|
| WEIGHT PER BLADE |
| Spacing option A |
|
| Spacing option B |
|
| Spacing option C |
|
| OPERATING SPEED |
| Miles per hour |
6.4 to 9.7 km/h4 to 6 mph |
| POWER REQUIREMENTS |
| Horsepower required |
86 to 186 kW115-250 hp |
| LEVELING OPTIONS |
| Option 1 |
Crank-adjusted fore-aft leveling |
| Option 2 |
|
| DEPTH CONTROL |
| Option 1 |
Single point |
| Option 2 |
|
| Option 3 |
|
| HYDRAULIC REQUIREMENTS |
| Standard |
1 selective control valve (SCV) required for raising and lowering |
| Option 1 |
Additional control valve for hydraulic hitch adjustment |
| Option 2 |
|
| Option 3 |
|
| ELECTRICAL REQUIREMENTS |
| Standard |
9-pin connector for warning lights |
| Option 1 |
|
| Option 2 |
|
| HITCH |
| Type |
Self-leveling hitch with manual or hydraulic line-of-draft adjustment |
| WING FLEX |
| Up |
|
| Down |
|
| FRAME |
| Tubing |
76×178-mm (3×7-in.) tubular steel mainframes |
| Underframe clearance |
305 mm12 in. |
| GANG |
| Angle |
Front16, 19, or 22 degree (angle)Rear18, 21, or 24 degree (angle)Adjustable |
| Tubing |
Front102x152-mm (4×6-in.) tubular steelRear102x152-mm (4×6-in.) tubular steel |
| Gang bolt |
|
| Gang standard |
|
| Welded spool diameter |
|
| Bearings |
Dura-Flex |
| Scraper |
Combination |
| FINISHING BLADES |
| Standard |
Integral furrow filler |
| Middle breaker |
Offset |
| BLADES |
| Spacing |
229 or 279 mm9 or 11 in. |
| Size |
Option 1610 x 6.5 mm24 x 0.256 in.Option 2660 x 6.5 mm26 x 0.256 in. |
| WHEELS |
| Mainframe wheels and tires |
Option 1Two wheels with 11L-15Fl load range D tires (in base price)Option 2Four (dual) wheels with 11L-15Fl load range D tires (optional) |
| Wingframe wheels and tires |
|
| Stabilizer wheels |
|
| HARROWS |
| Option 1 |
|
| Option 2 |
|
| REAR HITCH |
| Available |
|
| Tubing size |
|
| Telescoping |
|
| Tongue weight rating |
|
| GVW |
|
| Wiring harness for transport lights |
|
| Hydraulic hoses and couplers |
|
| WARRANTY |
| Type |
|
| ADDITIONAL FEATURES |
| Option 1 |
|
| Option 2 |
|
| Option 3 |
|
| Option 4 |
|
| Option 5 |
|
| ADDITIONAL INFORMATION |
| Date collected |
|
