

A BD11 Drill is truly at home in well-prepared fields. However, where conditions are a bit more rough, a BD11 Drill provides as much as 124 pounds of downpressure per opener to slice through tough soils and moderate residue. The result is more accurate, consistent seeding depth.
The BD11 comes in three sizes: 8-, 10- and 13-feet wide. The standard row-spacing is 7.5 inches. For the 10- and 13-feet models, 6-inch spacing is available. Ten-inch spacing is offered on the 13-foot tool.
John Deere BD11 Series End-Wheel Grain Drills | |
DIMENSIONS | |
Working width | 26.9 cm10.6 in.27.2 cm10.7 in. |
Transport width | 3.8 m12.6 ft |
Available row spacings | 15.2 cm6 in.19.1 cm7.5 in. |
Transport ground clearance | 13.8 cm5.5 in. |
WEIGHT | |
Plain box (7.5-in. spacing) | 726 kg1,600 lb |
Combo box (7.5-in. spacing) | 816 kg1,800 lb |
Combo box (7-in. spacing) | |
BOX CAPACITY | |
Plain grain | 0.987 m328 bu |
Combo | 40 percent grain0.476 m313.5 bu60 percent grain0.641 m318.2 bu100 percent grain0.973 m327.6 bu1.198 m334 bu |
Fertilizer or native grass | |
Grass seed or legume (small seed) | 0.053 m31.5 bu |
TIRES | |
Implement | 7.5-20, 4 pr |
Double-rib, implement | 7.5-20, 4 pr |
Farm implement, front caster | |
Farm implement, rear transport | |
OPENERS | |
Type | Double disk, staggered pattern: 33.02 cm13 in. |
Quantity | 21, 17 |
Down pressure | 56 kg124 lb |
Travel range | |
GRAIN AGITATOR | |
Grain box | Standard |
Native box | |
SEEDBOOT | |
Type | Cast aluminum or cast iron |
METERING | |
Type | Fluted feed |
Acremeter | Standard |
DEPTH GAUGING PRESS WHEELS SIZE | |
Steel | |
Rubber | 2.5×30.5 cm1x2 in.5.1×33 cm2x3 in.10.2×30.5 cm4x12 in. |
DISK SOIL PENETRATION | |
Depth | |
HITCH | |
Regular | Yes |
Swivel | |
ATTACHMENTS AVAILABLE | |
Row markers | |
Outside disk scrapers | Optional |
Half-speed drive | Optional |
Grass seed or small seed legume box | Optional |
Small seed drop tubes | |
SET-UP TIME | |
Labor hours | 2 to 3 |
WARRANTY | |
Time period | 1 year |
ADDITIONAL INFORMATION | |
Date collected |