John Deere 6135B (135 Hp Tractor)

JD 6135B Engine Specifications

Engine Type – Inline, High-Pressure Common Rail
Engine Model – 4045HCP11
Air Inlet Type – Turbocharged Inter-cooled
Cooling Type – Circulating Water Cooling
Number of Cylinders – 4
Bore/Stroke, mm (in) – 106.5/127 (4.19/5)
Displacement, L – 4.5
Engine Power at Rated Speed, kW (hp) – 99.3 (135)
Rated Engine Speed, rpm – 2200
Maximum Engine Torque, Nm (lb·ft) – 552 (407)
Speed at Maximum Torque, rpm – 1600
Slow Idle, rpm – 850-900
Fast Idle, rpm – 2325-2375
Air Cleaner Type – Dry Type with Safety Element
Battery Voltage (V) – 12
Alternator Amperage – 90
Safety Start Type – Neutral Start

John Deere 6135B Power Take-off

PTO Type – Independent
Outer Spline Specifications, mm (in) – 6/21 Spline: 35 (1.38)
Speed, rpm – 540/1000
Transmission Ratio – (112:29) / (95:46)
PTO Output Power, kW – 84.4

Transmission

Type – Unsynchronized gear
Gears – 24 forward and 12 reverse
Clutch – 304.8mm dry disc
Gears Forward / Gears Reverse (Option) – 12F/4R
Gears Forward / Gears Reverse – 24F/12R

JD 6135B Steering and Brakes

Steering System Type – Hydraulic Steering
Steering Pump Type – Open Center and Non-reaction
Braking System Type – Mechanical

Hydraulic System

Type – Open Center, Separated
Hydraulic Pump – Gear Pump
System Pressure, MPa – 19-20
Control Modes – Position control, Draft sensing control, Rate of drop
Hydraulic Output Device – Dual SCV or Triple SCV
Hitch Type – Rear Hitch Valve

John Deere 6135B Hitch

Hitch Type – Category 2
Lower Link Type – Fixed Ball Type
Lateral Sway Control – Stabilizer Bar
Lift Capacity@610mm, kN – 30
Drawbar Type – Category 2
Maximum Drawbar Force, kN – 42
Maximum Drawbar Power, kW – 75

Capacities

Fuel Tank L (gal) – 220 (58.11)
Transmission Case, L (gal) – 60 (15.65)
Crankcase, including Filter, L (gal) – 15 (3.96)
MFWD Axle Housing, L (gal) – 5 (1.32)
MFWD Wheel Hub, L (gal) – 0.8 (0.21), Each Side
Cooling System, L (gal) – 18 (4.76)

JD 6135B Dimensions and Weights

Overall Length, mm (in) – 4800 (188.97)
Overall Width, mm (in) – 2300 (90.55)
Overall Height (to Top of Canopy), mm (in) – 2990 (117.71)
Wheelbase, mm (in) – 2560 (100.79)
Ground Clearance MFWD Differential Bottom, mm (in) – 480 (18.89)
Ground Clearance Drawbar Pin Bottom, mm (in) – 410 (16.14)
Minimum Operating Weight, kg (lb) – 4630 (10207)
Maximum Front Ballasts, kg (lb) – 600 (1322)
Maximum Rear Ballasts, kg (lb) – 440 (970)
Turning Radius MFWD On, Minimum, m (ft) – 5.5 (18.04)
Turning Radius MFWD Off, Minimum, m (ft) – 5 (16.4)